Glex

Glex Uses, Dosage, Side Effects, Mechanism of Action, How Long Does it Take to Work? Glex is a brand name. Its generic name is Chlorhexidine.

Glex

Glex is an antiseptic used for topical treatments of both humans and animals. It is one of the most commonly used antiseptics for its broad-spectrum action on both Gram-positive and Gram-negative bacteria. Glex is effective against a wide range of microorganisms, including Gram-positive and Gram-negative bacteria, yeast, fungi, protozoa, viruses and even some slime-forming bacteria.

Uses for Glex

Glex is used to disinfect the skin and mucous membranes, to prevent infection in wounds and burns, and to treat skin infections. It is also used in mouthwashes and denture cleansers, as well as in surgical and procedural areas for pre, intra and postoperative care, and prenatal and postpartum care. It is also used in contact lens care solutions and disinfectants.

Mechanism of action

Glex works mainly by binding to bacterial cell walls and interfering with their structure and function. It also inactivates bacterial enzymes and disrupts the membrane of Gram-positive bacteria, increasing its permeability and preventing the bacteria from carrying out their normal metabolic processes. In addition, chlorhexidine causes the death of Gram-negative bacteria by breaking down their cell membrane.

How long does it take to work?

Glex works quickly and the action of the antiseptic can be seen within minutes of application. The duration of effectiveness depends on the type of microorganisms and the application area. Generally, the claimed residual effect of chlorhexidine lasts from hours to days depending on the application.

Absorption

Glex is poorly absorbed through intact skin, mucosa, and wound dressings, and most of the absorption occurs in the intestines. It is gradually excreted by the kidneys.

Route of elimination

Glex is eliminated mainly through renal excretion or, to a lesser extent, through biliary excretion. Most of it is excreted unchanged in the urine.

Dosage

Glex is available in different forms such as ointment, gel, solution, and spray. It is usually applied with a cotton-tipped applicator, spray bottle, or other suitable applicator. The dosage of chlorhexidine depends on the condition being treated and the individual’s age, weight, and medical history. The usual adult dosage of topical chlorhexidine for skin and mucous membrane use is 0.2-1% solution every 8-12 hours. For wound dressing, the solution is usually applied once a day. For oral use, 0.12% is recommended.

Administration

Glex should be used as prescribed and administered according to the directions provided by the healthcare professional. The area to be treated should be cleaned with soap and water and dried thoroughly before applying the medication. For topical or intracavitary administrations, the solution should be applied in a thin layer and gently massaged into the skin or mucous membranes. After use, the area should be rinsed thoroughly with water. In case of contact with the eyes, they should be irrigated with water immediately.

Side Effects

Glex may cause some side effects, including burning, stinging, itching, redness, rash, or irritation at the application site. If these or any other suspicious effects occur, seek immediate medical attention.

Toxicity

Glex has a low toxicity, meaning it has low potential for causing harm when used in accordance with its directions. However, in high doses it can cause serious injury and even death. It is important to follow dosage instructions carefully.

Precaution

Glex should be used cautiously in patients with kidney or liver disease, as it may accumulate in their bodies. It should not be applied to broken or damaged skin, and contact with the eyes should be avoided. It should also not be taken orally. If ingested, seek medical help immediately.

Interaction

Glex may interact with other medications to produce an undesirable effect. It is important to tell your healthcare provider about any prescription and non-prescription medications you are taking, including vitamins and supplements, before using chlorhexidine.

Disease Interaction

Glex may interact with certain disease states and may worsen or cause side effects. It should be used with caution in patients with kidney or liver disease, as it may accumulate in their bodies. It may also worsen the symptoms of diabetes.

Drug Interaction

Glex may interact with certain medications, such as ciprofloxacin, tetracyclines, and antifungals, to increase or decrease their effectiveness. It should not be used with other antiseptics or disinfectants.

Food Interactions

Glex may interact with certain foods, such as citrus fruits, tomatoes, egg whites, and dairy products, to reduce its effectiveness. It is best to consult your healthcare provider if you are taking any of these foods.

Pregnancy Use

Glex should be used cautiously in pregnant women. Animals studies have shown an increase in birth defects when exposed to high doses of chlorhexidine, so it is best to consult your healthcare provider before using it. It should not be used during labor or delivery.

Lactation Use

The safety of chlorhexidine during lactation has not been established. It may be excreted in breast milk, and therefore it is not recommended for use while breastfeeding. It is best to consult your healthcare provider before using chlorhexidine.

Acute Overdose

An overdose of chlorhexidine can lead to serious side effects or death. If an overdose is suspected, seek immediate medical attention. Sign and symptoms of an overdose may include nausea, vomiting, abdominal cramps, diarrhea, drowsiness, dizziness, confusion, restlessness, and seizures.

Contraindication

There are certain conditions in which chlorhexidine should not be used, including allergies to the substance itself, any other ingredients in the product, and all other antiseptics or disinfectants. It should also not be used on broken or damaged skin, or on areas where there is an inflammation or infection present.

Use Direction

Glex should be used in accordance with the directions provided by the healthcare provider. It is important to read and follow all instructions carefully before use. The area to be treated should be cleansed with soap and water and dried thoroughly before application. After applying the medication, the area should be rinsed thoroughly with water. If the medication gets into the eyes, they should be irrigated with water immediately.

Storage Condition

Glex should be stored according to the product instructions. Generally, it should be stored at room temperature and away from direct sunlight and moisture. It should not be frozen. It should be kept in its original container and kept away from children and pets.

Volume of Distribution

The volume of distribution for chlorhexidine is not known, but it is known to distribute widely throughout the body. It is lipophilic and has a high affinity for keratinized tissue, which means it is able to penetrate the skin and mucous membranes.

Half Life

The elimination half-life of chlorhexidine is about 4-6 hours. It is slowly eliminated from the body mostly via renal excretion.

Clearance

Glex is slowly eliminated from the body, mainly by renal excretion, with a clearance rate of 0.14-0.26 mL/min/kg. The clearance rate may vary depending on the individual’s age, weight, medical condition, and other factors.

Here you find in details version of Glex

Some Frequently Asked Questions About Glex

What is Glex?

Glex is an antiseptic, disinfectant, and topical antimicrobial agent. It is also known as chlorhexidine gluconate (CHG). It is used to reduce bacterial growth on the skin and other surfaces.

What is Glex used for?

Glex is used for a variety of medical and dental procedures, including dental prophylaxis, wound dressings, hand washings, surgical disinfection, and as an oral antiseptic. It may also be used to reduce bacteria on the surface of the skin before surgery.

How does Glex work?

Glex works by attacking the cell structure of bacteria, leading to their destruction. It works by decreasing layers and layers of the bacterial cell wall, depriving it of essential nutrients and ultimately leading to death.

What are the side effects of Glex?

The most common side effects of Glex include dryness, stinging, itching, burning, and irritation of the skin or eyes. Rarely, it may cause an allergic reaction.

What is the difference between Glex and Alcohol?

The main difference between Glex and Alcohol is that Glex is a much more powerful antiseptic than alcohol. Glex can also be used in a wide range of medical and dental procedures, while alcohol is mainly used as an antisepsis for skin cleaning.

Is Glex an antibacterial or an antiseptic?

Glex is both an antibacterial and an antiseptic. It is effective against a wide range of bacteria and fungi, as well as viruses and spores.

What is the recommended concentration of Glex?

The recommended concentration of Glex for medical use is 0.05 - 0.2%. A higher concentration may be used depending on the application and the degree of disinfection required.

How quickly does Glex act?

Glex acts quickly; typically it begins to act within minutes and can achieve full effectiveness within approximately 30 minutes.

Is Glex safe?

Glex is generally considered safe when used according to the manufacturer's instructions. It is an irritant, however, so care should be taken to avoid contact with eyes, mouth, and other sensitive areas.

How is Glex dispensed?

Glex is typically dispensed in liquid or gel form, which can be applied directly to the skin or used in conjunction with other medical devices. It is also available in pre-soaked gauze or wipes for easy use.

Does Glex need to be diluted?

Yes, some concentrations of Glex may need to be diluted before use, depending on the application. Always follow the manufacturer's instructions for dilution and use.

Where is the best place to buy Glex?

Glex can be purchased from medical suppliers or online retailers. Be sure to purchase from a reputable source, and always read and follow the manufacturer's instructions for use.

What is the shelf life of Glex?

The shelf life of Glex depends on the product. Most products are good for up to two years, but check the manufacturer's directions for the specific product to confirm.

What is the active ingredient in Glex?

The active ingredient in Glex is chlorhexidine gluconate. It is an antiseptic and disinfectant that is effective against a wide range of bacteria, fungi, and viruses.

Is Glex safe to use on dogs or cats?

Yes, Glex may be used to disinfect and clean wounds on dogs and cats. However, it should never be administered orally, and the directions should always be followed carefully to avoid irritation or other side effects.

Is Glex carcinogenic?

No, Glex is not known to be carcinogenic. However, it has been seen to be an irritant to skin and mucous membranes, and should be used with caution.

Is Glex safe for use in humans?

Yes, Glex is generally safe for use in humans when used according to package directions. However, it can be an irritant to skin and mucous membranes, so care should be taken to avoid contact with eyes, mouth, and other sensitive areas.

Is Glex effective against viruses?

Yes, Glex is effective against certain viruses, including poliovirus and rotavirus. However, it may not be effective against other viruses, such as coronaviruses.

What is the preferred method of applying Glex?

The preferred method of applying Glex is to use a pre-soaked gauze or wipe. However, it can also be applied directly to the skin or to medical devices.

Does Glex require a prescription?

No, Glex does not require a prescription. It can be purchased from most medical suppliers and online retailers without a prescription.

Is Glex compatible with other antiseptics?

Yes, Glex is compatible with many other antiseptics, including Alcohols, Betadine, and Hydrogen Peroxide. However, it should not be used in conjunction with Iodine.

Does Glex cause skin discoloration?

No, Glex does not typically cause skin discoloration. However, it may cause skin dryness or irritation in some cases.

Does Glex need to be mixed with water?

No, Glex does not need to be mixed with water. It is typically applied directly to the skin or used in conjunction with other medical devices.

Can Glex be used to clean wound dressings?

Yes, Glex can be used to clean wound dressings. However, it should not be used on open or draining wounds, as it can cause further irritation.

How often should Glex be applied?

The frequency with which Glex should be applied depends on the application. For wound dressings, it should be applied as often as the dressing is changed. For surgical disinfection, it should be applied every two to four hours.

Can Glex be used on open wounds?

No, Glex should not be used on open or draining wounds as it can cause further irritation. It should only be used on wounds that are beginning to heal.

How long does Glex take to kill bacteria?

Glex begins to act within minutes and can achieve full effectiveness within approximately 30 minutes.

Does Glex need to be kept in a cool, dry place?

Yes, Glex should be kept in a cool, dry place to maintain its effectiveness and shelf life. Keep the container tightly sealed when not in use.

Can Glex be used before surgery?

Yes, Glex can be used before surgery to reduce the number of bacteria on the surface of the skin. This helps to reduce the risk of infection during the procedure.

Can Glex be used on sensitive skin?

Yes, Glex can be used on sensitive skin, however care should be taken to avoid contact with eyes, mouth, and other sensitive areas. Test the product on a small area of the skin first to look for signs of irritation.

How long does Glex need to stay on the skin?

The length of time that Glex needs to stay on the skin depends on the application. For wound care, it should stay on the skin until the dressing is changed. For surgical disinfection, it should remain for two to four hours.

What is the recommended dilution rate for Glex?

The recommended dilution rate for Glex depends on the application, so it is best to follow the manufacturer's instructions for each product. Generally, it is recommended to dilute between 0.05 - 0.2%.

Can Glex be used to clean medical instruments?

Yes, Glex can be used to clean medical instruments. It should be used according to the manufacturer's instructions and allowed to remain on the surface for two to four hours to effectively disinfect.

Does Glex have any adverse reactions?

The most common adverse reaction to Glex is skin irritation or dryness. It can also cause stinging, itching, burning, or redness. Rarely, it may cause an allergic reaction.

When is the best time to apply Glex?

The best time to apply Glex depends on the application. Generally, it should be applied to the skin or to wounds just before a procedure is performed, or just after a dressing has been changed.

Can Glex be used to clean dental instruments?

Yes, Glex can be used to clean dental instruments. It should be used according to the manufacturer's instructions and allowed to remain on the surface for two to four hours to effectively disinfect.

Does Glex have a smell?

Yes, Glex has a slight, unpleasant smell. The smell should dissipate quickly as the product dries.

Does Glex require rinsing?

No, Glex does not typically require rinsing. However, it may need to be rinsed off in certain cases, so it is best to follow the manufacturer's instructions for each product.

Can Glex be used on baby's skin?

Yes, Glex can be used on baby's skin, however, it is important to test it on a small area of the skin first to make sure there is no adverse reaction. It should never be administered orally to a baby.

Can Glex be used with other antiseptics or disinfectants?

Yes, Glex can be used in conjunction with other antiseptics and disinfectants, such as Alcohols, Betadine, and Hydrogen Peroxide. However, it should not be used with Iodine.

Does Glex cause staining on fabric?

No, Glex does not typically cause staining on fabric, however it is always best to test it on a small hidden area of the fabric first to make sure.

https://www.medicinesfaq.com/brand/glex, http://classyfire.wishartlab.com/tax_nodes/C0000000, http://classyfire.wishartlab.com/tax_nodes/C0002448, http://classyfire.wishartlab.com/tax_nodes/C0002279, http://classyfire.wishartlab.com/tax_nodes/C0000035, http://classyfire.wishartlab.com/tax_nodes/C0001099, http://classyfire.wishartlab.com/tax_nodes/C0000474, http://classyfire.wishartlab.com/tax_nodes/C0001030, http://classyfire.wishartlab.com/tax_nodes/C0003633, http://classyfire.wishartlab.com/tax_nodes/C0003152, http://classyfire.wishartlab.com/tax_nodes/C0004557, http://classyfire.wishartlab.com/tax_nodes/C0001516, http://classyfire.wishartlab.com/tax_nodes/C0000117, http://classyfire.wishartlab.com/tax_nodes/C0004150, https://www.ebi.ac.uk/chebi/searchId.do?chebiId=CHEBI:3614, http://www.hmdb.ca/metabolites/HMDB0015016, http://www.genome.jp/dbget-bin/www_bget?drug:D07668, http://www.genome.jp/dbget-bin/www_bget?cpd:C06902, https://pubchem.ncbi.nlm.nih.gov/summary/summary.cgi?cid=9552079, https://pubchem.ncbi.nlm.nih.gov/summary/summary.cgi?sid=46506388, https://www.chemspider.com/Chemical-Structure.2612.html, http://www.bindingdb.org/bind/chemsearch/marvin/MolStructure.jsp?monomerid=50170723, https://mor.nlm.nih.gov/RxNav/search?searchBy=RXCUI&searchTerm=2358, https://www.ebi.ac.uk/chebi/searchId.do?chebiId=3614, https://www.ebi.ac.uk/chembldb/index.php/compound/inspect/CHEMBL790, https://zinc.docking.org/substances/ZINC000014768621, http://bidd.nus.edu.sg/group/cjttd/ZFTTDDRUG.asp?ID=DAP001326, http://www.pharmgkb.org/drug/PA164776863, http://www.rxlist.com/cgi/generic2/chlorhexidine.htm, https://www.drugs.com/cdi/chlorhexidine-liquid.html, https://en.wikipedia.org/wiki/Chlorhexidine,